Set up a temporary construction fence that can change with your project. ANTCORE panels, stands, clamps, and gates work together to form a portable perimeter around jobsites, equipment areas, commercial developments, and industrial work zones. When the layout changes or the job ends, the components can be removed, stored, and redeployed.

Fence Panels for Construction Sites

Choose 12 ft wide panels in either 6 ft or 8 ft heights. The 6 ft ANTCORE-600 has a vertical center support; the 8 ft ANTCORE-800 adds a horizontal center support. Both have hot-dip galvanized 16-gauge steel frames and 12.5-gauge chain link with 2-1/4 in diamond openings. The panels are assembled in the USA.

Hand-laced mesh wraps around the frame and supports, reducing protruding ties that can catch when panels are stacked or moved between jobsites. The listed bare-panel weights are approximately 48 lb for the 6 ft panel and 60 lb for the 8 ft panel.

Build the Perimeter Your Project Needs

Portable tube stands support the panels without permanently setting fence posts. Each 36 x 12 in stand has two receivers for compatible 1-3/8 in panel posts. Bolt-on clamps connect adjoining panel frames. Panels, stands, and clamps are sold separately so you can select quantities for your fence layout.

Unscreened panels are available where visibility through the fence is useful. For added privacy, choose factory-installed UV-stabilized knitted polyethylene screen with approximately 85% coverage in black, tan, or forest green. Assess wind, terrain, fence height, and screening when planning ballast or bracing.

Plan Jobsite Access

• 6 ft and 8 ft pedestrian gates provide entrances for workers and authorized visitors.
• A swing gate conversion kit adds wheel and hinge hardware to one compatible fence panel; the panel is sold separately.
• Complete 12 ft single and 24 ft double sliding gates provide access for vehicles, equipment, and deliveries.

Commercial Ordering

Fence panels have a minimum order of 12. A full truckload is approximately 400 of the 6 ft panels or 300 of the 8 ft panels with the required stands and clamps. Shipping origin depends on inventory and destination, with Florida, Texas, and California listed as possible locations. Contact us to confirm delivery, local pickup, and installation availability for your project.