Home > Traffic Safety Products > Angle Iron Type III Barricade >

10'Type III-Angle Iron Feet & 63" Angle Iron Uprights with Diamond Grade Striped Sheeting - Both Sides

Shipping Note:

: $461.79

Product Code: 3910-DG-LR-KIT

Qty:

Description

10'Type III-Angle Iron Feet & 63" Angle Iron Uprights with Diamond Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	SafetyPRO 250 - 11' ft. belt barrier $108.00
	Pedestrian Control Barricade PATHCADE, 2008-O-EGL, Orange. Two Sections of Engineer Grade Striped sheeting on one side of the barricade, LEFT Top & Bottom One Side $179.00
	Plasticade Barricade Type I Yellow - Diamond Grade $49.27
	Fibercade - 3" x 24" Board - NO SHEETING $3.65
	Knuffi Model B Edge Bumper Guard Fluorescent Black/Yellow 1M - Surface Guards $26.65
	SET: 18 BLACK Retractable 11' ft. Belt Stanchions, with Vertical Storage Cart $1,625.80
	8'Type III-Power Post Uprights & Angle Iron Feets with Engineer Grade Striped Sheeting - Both Sides $171.34
	Plasticade Barricade Type II White - 8" X 24" Top Panel 8" X 24" Bottom PanelEngineer Grade Striped Sheeting $64.49
	Safety Green Stanchion with DOT Approved Reflective Stripe $53.50