Home > Traffic Safety Products > Telespar Type III Barricades >

12' Type III-Telespar Feet & 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Shipping Note:

: $239.95

Product Code: 3512-HIP-KIT

Qty:

Description

12' Type III-Telespar Feet & 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Telespar Type III

Telespar is galvanized for superior corrosion protection, 14 gauge, hot rolled high carbon steel
Angle iron feet are 10 gauge, mill finish
Universal mounting holes, pre-punched 7/16"
Square shape provides superior wind load capabilities and inhibits warping
Quick removal of uprights from feet, allows for short term or permanent placement
Easy to assemble and replace parts if necessary
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths
Boards may be sheeted (on one or both sides) or unsheeted
Telespar and Angle Iron uprights are 63"H
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Two Options Available:

Telespar Uprights with Telespar Feet

Telespar Uprights with Angle Iron Feet

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Fibercade - 12" x 24" Board - NO SHEETING $6.49
	Sand Fillable Barrel Base $30.82
	Minicade Yellow - 12" X 24" Engineer Grade Striped Sheeting $53.60
	Screenflex STANDARD Portable Room Divider - Vinyl $733.10
	Break-Away Type III - 6' Break-Away Kit with Diamond Grade Striped Sheeting (Both Sides) $380.21
	Wall Mount Belt WallPro 25' ft. $120.00
	Tensabarrier Magnetic Belt End Receiver $13.50
	6' Type III-Power Post 63" Uprights and Telespar Feet with High Intensity Prismatic Grade Striped Sheeting - One Side $157.62
	Clear / See-through Room Divider - 3 Panel - 6' 2"H x 10' 0"L $1,513.00