Home > Traffic Safety Products > Power Post Type III Barricades >

8' Type III-Power Post 63" Uprights and Telespar Feet with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Shipping Note:

: $228.74

Product Code: 3308-HIP-LR-KIT

Qty:

Description

8' Type III-Power Post 63" Uprights and Telespar Feet with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Power Post with Steel Legs Type III

Strong and Durable Plastic Square Tube Type III Barricades

Plastic posts save you time and money!
Easier to handle, set up and break down goes faster
Lightweight but strong - 67% lighter than steel square tube posts, impact resistant
No rust or corrosion
Use with Telespar or Angle Iron feet
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to assemble and replace parts if necessary
Polymer post is 63"H x 1.75"W, 3.25 lbs. weight
NCHRP-350/MASH Accepted, Meets MUTCD Standards

Comes with holes for boards and lights

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	ConePro 600 - 20' ft. Retractable Barrier $62.00
	Minicade Yellow - 12" X 24" Engineer Grade Striped Sheeting $53.60
	890 Slimline Tensabarrier $128.10
	Plastic Barricade for Public Events PATHCADE, 2008-W-DGLR, White. Two Sections of Diamond Grade Striped sheeting on one side of the barricade, LEFT/RIGHT Top & Bottom Both Sides $234.46
	2" Traffic Control Stanchion with Silver DOT Reflective Stripe $45.56
	Safetycade - 8" x 24" Corrugated Plastic Panel with Engineer Grade Striped Sheeting, Right Stripe $7.64
	Break-Away Type III - 12' Break-Away Kit with Diamond Grade Striped Sheeting (Both Sides) $615.01
	Fibercade - 12" x 24" Board - NO SHEETING $6.49
	Squarecade 36 Sign Stand Yellow - 24" x 24" Engineer Grade Sign Legends $100.19