Home > Traffic Safety Products > Angle Iron Type III Barricade >

12' Type III-Angle Iron Feet & Telespar 63" Uprights with Diamond Grade Striped Sheeting - Both Sides

Shipping Note:

: $551.85

Product Code: 3712-DG-LR-KIT

Qty:

Description

12' Type III-Angle Iron Feet & Telespar 63" Uprights with Diamond Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Navicade - 1 - 4" White High Intensity Grade Sheeting and 1 - 6" White High Intensity Prismatic Grade Sheeting $18.85
	Mini Wall Mount Tensabarrier 891 (7' - 13' ft.) $54.99
	Stainless Steel Stanchion Kit: 2 + 1 velvet ropes (Crown Top with Flat Base) $274.00
	42"H, 4 - 4" High Intensity Prismatic Grade White Reflective Bands $14.51
	6' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side $142.40
	Airport Barricade Hazard Light, Dual Mode Solar-Powered LED: Flashing or Steady-Burn, 360° $64.99
	Safetycade - 8" x 24" Corrugated Plastic Panel with Engineer Grade Striped Sheeting, Right Stripe $7.64
	Stainless Steel Stanchion Kit: 4 + 3 velvet ropes (Ball Top with Dome Base) $604.00
	Quad Lamps, 36 Amp, 8 hour estimated run time $1,637.02