Angle Iron Foot, mill finish

Angle Iron Type III

• Angle Iron Uprights are 10 gauge, galvanized steel
• Uprights contain holes for boards 11/32" and holes for lights 9/16"
• Feet are 10 gauge steel, mill finish
• Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
• Quick removal of uprights from feet - allows for short term or permanent placement
• Easy to asssemble and replace parts if necessary
• Accepts two flashing lights
• Sold in kits or as component parts
• NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"