Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - Both Sides

Shipping Note:

: $199.03

Product Code: 3910-EG-LR-KIT

Qty:

Description

10' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	28"H, 2 - 4" High Intensity Prismatic Grade White Reflective Bands $11.69
	Fibercade - 12" x 24" Top Panel, 8" x 24" Bottom Panel, Engineer Grade Striped Sheeting $91.70
	Rhino Barrel Only, Low Density, 4-6" High Intensity Prismatic Grade Sheeting $70.20
	10' Type III-Angle Iron Feet & Telespar 63" Uprights with Engineer Grade Striped Sheeting - Both Sides $205.42
	Navicade - 4 - 6" High Intensity Prismatic Grade Sheeting $24.00
	Rhino Barrel Low Density Polyethylene Diamond Grade Sheeting $49.19
	Pallette of 50 BLACK Retractable 11' ft. Belt Barriers $3,150.00
	Brass Stanchion Kit: 2 + 1 velvet ropes (Ball Top with Dome Base) $298.00
	Two A-Frame Legs with One 10' Diamond Grade Sheeted 1" x 8" Plastic Board $176.82