Home > Traffic Safety Products > Angle Iron Type III Barricade >

12' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Diamond Grade Striped Sheeting - One Side

Shipping Note:

: $339.66

Product Code: 3912-DG-KIT

Qty:

Description

12' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Diamond Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Safetycade - 12" x 24" Corrugated Plastic Panel with Engineer Grade Striped Sheeting, Right Stripe $10.47
	Narrowcade Orange - 12" X 24" Engineer Grade Striped Sheeting $58.27
	Plastic Pail Chain $140.77
	Knuffi Model H+ Corner Wall Protection Kit Reflective Red/White 1M - Pipe Guards $114.98
	Knuffi Model A Corner Bumper Guard Black/Yellow 1M - Warning Guards $25.68
	Knuffi Model D Surface Bumper Guard Black/Yellow 5M - Protective Corners $183.90
	Knuffi Model C+ Surface Wall Protection Kit Reflective Red/White 1M - Rack Guards $126.15
	Red Carpet Runner with Carry Bag (3' x 15') $139.00