Home > Traffic Safety Products > Angle Iron Type III Barricade >

4' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - One Side

Shipping Note:

: $106.19

Product Code: 3904-EG-KIT

Qty:

Description

4' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Narrowcade Orange - 12" x 24" Engineer Grade Legends $69.40
	6' Speed Bump with hardware kit for concrete installation $133.92
	Long 30' ft Belt Wall Mount Tensabarrier 897EHC-30 $155.00
	Minicade Orange - 12" x 24" High Intensity Prismatic Grade Legends $72.66
	Replacement Belt Cassette fits WallMaster 13' ft $39.00
	Plasticade Barricade Type II White - 12" x 24" Top Panel Custom Diamond Grade Sign Legends $126.99
	Plasticade Barricade Type II White - 8" X 24" Top Panel 8" X 24" Bottom PanelDiamond Grade Striped Sheeting $101.90
	Tensabarrier 180 Rotating Wall Mount (7' - 13' ft.) $94.99
	Safetycade - 12" x 24" Top Panel, 8" x 24" Bottom Panel with Diamond Grade Striped Sheeting $208.70