Home > Traffic Safety Products > Angle Iron Type III Barricade >

4' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Shipping Note:

: $141.32

Product Code: 3704-HIP-LR-KIT

Qty:

Description

4' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Single Frame Poster Stand $99.00
	6' Type III-Power Post 63" Uprights and Telespar Feet with High Intensity Prismatic Grade Striped Sheeting - Both Sides $194.40
	Safetycade - 8" x 24" Corrugated Plastic Panel with Diamond Grade Striped Sheeting, Right Stripe $18.10
	Black Braided Rope 8 Feet $75.00
	Rhino Barrel High Density Polyethylene High Intensity Prismatic Grade $49.19
	Knuffi Model S Surface Wall Protection Kit Black/Yellow 1M - Rack Guards $79.90
	12' Board with Diamond Grade Striped Sheeting - One Side $98.49
	Plastic Chain on the Reel $108.65
	Plasticade Barricade Type I Orange - 8" X 24" Top Panel Diamond Grade Striped Sheeting $75.41