Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & Telespar 63" Uprights with Engineer Grade Striped Sheeting - Both Sides

Shipping Note:

: $205.42

Product Code: 3710-EG-LR-KIT

Qty:

Description

10' Type III-Angle Iron Feet & Telespar 63" Uprights with Engineer Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Burgundy Leather-like Vinyl Queue Rope, 6 foot with Stainless Steel Hooks $55.50
	Brass Stanchion Kit: 2 + 1 velvet ropes (Ball Top with Dome Base) $298.00
	Econocade II Drum Only, Low Density, 4-6" Diamond Grade Sheeting $97.11
	6' I-Beam with High Intensity Prismatic Sheeting $54.66
	HyperSpike HS-10R Acoustic Hailing Device – 750m Range, Powerful Megaphone Loudhailer $5,323.50
	Gemstone Vertical Panel White - 8" x 24" High Intensity Prismatic Grade Striped Sheeting with4" wide stripes $27.01
	42"H, 2 - 3" High Intensity Prismatic Grade White Reflective Bands $11.66