Home > Traffic Safety Products > Angle Iron Type III Barricade >

6' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - One Side

Shipping Note:

: $123.82

Product Code: 3906-EG-KIT

Qty:

Description

6' Type III-Angle Iron Feet & 63" Angle Iron Uprights with Engineer Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Chainboss YELLOW Plastic Safety 2" Chain UV Resistant - 25ft bag with S-hooks (Multi-Pack) $107.50
	Gemstone Vertical Panel Orange - 8" x 34" High Intensity Prismatic Grade Striped Sheeting with6" wide stripes $31.02
	Double Frame Poster Stand $270.00
	8'Type III-Power Post 63" Uprights and Telespar Feet with Diamond Grade Striped Sheeting - One Side $267.64
	Combocade Barricade - Steel Legs with 12"x24" board on top and 8"x24" board on bottom, both unsheeted $39.93
	Minicade Yellow - 12" x 24" High Intensity Prismatic Grade Legends $72.66
	4' Type III-Power Post Uprights & Angle Iron Feet with Engineer Grade Striped Sheeting - Both Sides $121.62
	Graphic Barricade Cover $138.00
	Rhino Barrel Low Density Polyethylene Diamond Grade Sheeting $49.19