Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Shipping Note:

: $188.23

Product Code: 3710-HIP-KIT

Qty:

Description

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Ring Coupler $2.93
	Perimeter Patrol Security Fence Panel Kit 4 Panels 6'x7.5' (30' ft) Yellow $898.19
	890 Slimline Tensabarrier $128.10
	Safegate Manhole Guard Single Section with High Intensity Prismatic grade striped sheeting $64.99
	Economy Rope Stanchion Crown Top $97.00
	Narrowcade Yellow - 12" x 24" High Intensity Prismatic Grade Legends $83.72
	23" Classic Ground Post $3.95 Minimum order 10 posts, price for each.
	6' Speed Bump with rebar spikes for asphalt installation $192.64