Home > Traffic Safety Products > Angle Iron Type III Barricade >

4' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides
4' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides
 

Shipping Note:

  • Telespar Uprights Pallet Quantity - 100 units
  • Angle Iron Foot Pallet Quantity - 248 units
  • Pallet Size - 48" x 40", Product Overhangs
: $141.32


Product Code: 3704-HIP-LR-KIT
Qty:

Description
 

4' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Angle Iron Type III

  • Angle Iron Uprights are 10 gauge, galvanized steel
  • Uprights contain holes for boards 11/32" and holes for lights 9/16"
  • Feet are 10 gauge steel, mill finish
  • Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
  • Quick removal of uprights from feet - allows for short term or permanent placement
  • Easy to asssemble and replace parts if necessary
  • Accepts two flashing lights
  • Sold in kits or as component parts
  • NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Traffic Safety Products > Angle Iron Type III Barricade
Traffic Safety Products


4' Board with Engineer Grade Striped Sheeting - One Side $17.66
28"H, No Reflective Bands $7.36