Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Shipping Note:

: $188.23

Product Code: 3710-HIP-KIT

Qty:

Description

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Gemstone Vertical Panel White - 8" x 36" Engineer Grade Striped Sheeting with 6" wide stripes $27.28
	Knuffi Model B Edge Bumper Guard Black/Yellow 1M - Corner Guards $26.68
	6' Board with Engineer Grade Striped Sheeting - One Side $23.98
	Kit: ChainBoss Indoor/Outdoor 3" molded stanchion with black post, fillable base and 10' of 2" Yellow plastic Chain (6PACK) $300.00
	Tensabarrier Advance 889B & 889U (7' - 13' ft.) $135.00
	Fibercade - Flasher Leg 8"/8" Fits 8" x 24" Top Panel and Flashing Lights $7.85
	Two A-Frame Legs with Two 8' Engineer Grade Sheeted 1" x 8" Plastic Boards $106.58
	Dark Blue Navy Crushed Velvet Ropes $84.99
	QueueWay - QWAYSIGN-7" X 11" -PLEASE ENTER HERE (Double Sided) $74.50