Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & Telespar 63" Uprights with Engineer Grade Striped Sheeting - One Side

Shipping Note:

: $167.00

Product Code: 3710-EG-KIT

Qty:

Description

10' Type III-Angle Iron Feet & Telespar 63" Uprights with Engineer Grade Striped Sheeting - One Side

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Kit: Premium Retractable Belt Stanchion - Black steel post with 15lb base & 7.5' black belt (12 PACK) with Cart $899.00
	890 Slimline Tensabarrier $128.10
	Olive Green Carpet Runner $129.99
	Whiteboard Room Divider - 1 Panel - 6' 2"H x 3' 4"L $550.02
	SET: 18 POLISHED STEEL Retractable 11' ft. Belt Stanchions, with Horizontal Storage Cart $1,547.70
	Knuffi 3D Model A Protective Corners Black - Polyurethane Guard $26.65
	Econocade Barricade - 8" x 24" Top Panel, 8" x 24" Bottom Panel Diamond Grade Striped Sheeting $94.14
	HyperSpike® HS-18 (Remote Acoustic Hailing Device )
	Red Braided Rope - 6 Feet $71.00