Angle Iron Foot, mill finish

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Stanchion Sign "Blank Sign", 7"x11" Vertical, Clear Acrylic Insert $59.00
	Dry Erase / Tackable 6' x 5'9" Portable Room Divider $1,097.10
	Outdoor Plastic Barricade PATHCADE, 2008-O-HIPR, Orange. Two Sections of High Intensity Prismatic Grade Striped on one side of the barricade, RIGHT Top & Bottom One Side $172.67
	Safegate Manhole Guard Single Section with High Intensity Prismatic grade striped sheeting $64.99
	8' I-Beam Engineer Grade Sheeting $55.67
	Signicade Sign Stand White - 24" X 36" Engineer Grade Sign Legends $121.87
	4' Board with Engineer Grade Striped Sheeting - One Side $17.66
	OUTDOOR RETRACTA-BELT PRIME - POLISHED ALUMINUM POST, 10' BELT $74.55
	Portable Crowd Control Solutions CROWDCADE, 2004-O-EGLR, Orange. Engineer Grade Striped sheeting on both sides of the barricade, LEFT/RIGHT $115.35