Home > Traffic Safety Products > Angle Iron Type III Barricade >

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Shipping Note:

: $247.87

Product Code: 3710-HIPLR-KIT

Qty:

Description

10' Type III-Angle Iron Feet & Telespar 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	Single Frame Poster Stand $99.00
	Fibercade - 12" x 24" Top Panel Custom Diamond Grade Sign Legend, 8" x 24" Bottom Panel Diamond Grade Striped Sheeting $195.70
	6' Type III-Power Post 63" Uprights and Angle Iron Feet with High Intensity Prismatic Grade Striped Sheeting - One Side $134.16
	Knuffi Model C+ Surface Wall Protection Kit Reflective Red/White 1M - Rack Guards $126.15
	6' Board with Diamond Grade Striped Sheeting - Both Sides $92.97
	Econocade II Low Density Drum High Intensity Prismatic Sheeting $49.19
	Rhino Barrel, High Density -NO SHEETING $33.75
	10' Type III-Power Post Uprights & Angle Iron Feet with High Intensity Prismatic Grade Striped Sheeting - Both Sides $239.44
	Knuffi Model R30 Pipe Bumper Guard Black/Yellow 5M - Corner Guards $207.53