Angle Iron Foot, mill finish

Angle Iron Type III

Angle Iron Uprights are 10 gauge, galvanized steel
Uprights contain holes for boards 11/32" and holes for lights 9/16"
Feet are 10 gauge steel, mill finish
Plastic 1" x 8" boards are available in 4', 6', 8', 10' and 12' lengths - reflective sheeting on one or both sides, or none
Quick removal of uprights from feet - allows for short term or permanent placement
Easy to asssemble and replace parts if necessary
Accepts two flashing lights
Sold in kits or as component parts
NCHRP-350 Accepted, Meets MUTCD Standards

Angle Iron Type III Specification

Dimensions: Uprights - 1.5" x 1.5" x 63", Feet - 1.5" x 1.5" x 60", Riser - 6"

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

	OxBlock HiVis 53 lb Fence Base – Heavy-Duty Fence Ballast $2,142.00
	Customizable Plastic Barrier PATHCADE, 2008-W-HIPLR-T, White. One Section of High Intensity Prismatic Grade Striped sheeting on both sides of the barricade, LEFT/RIGHT Top Only Both Sides $172.67
	2 1/2" Traffic Control Stanchion with DOT Reflective Stripe $50.35
	Econocade Barricade - 12" x 24" Top Panel Diamond Grade Arrow Sign Legend, 8" x 24" Bottom Panel High Intensity Prismatic Striped Sheeting $101.67
	ChainBoss Indoor/Outdoor 3" molded stanchion with black post, 15lb. Duracast pre-filled base and 10' of 2" Yellow plastic Chain (2 pack) $79.00
	Clear / See-through Room Divider - 3 Panel - 6' 2"H x 10' 0"L $1,513.00
	10' Type III-Angle Iron Feet & Angle Iron 63" Uprights with High Intensity Prismatic Grade Striped Sheeting - Both Sides $241.43
	Sign Adapters $4.31
	Olive Green Carpet Runner $129.99